The DJ single-shaft humidifier consists of four parts: uniform feeding, blade feeding, mixing and dehumidification, vibration system, etc., and is equipped with a dedicated electronic control and water supply system. The device is fixed on the base as a whole, and the cylinder is composed of four groups of elastic The component is supported and vibrated by the excitation device to make the cylinder vibrate at high frequency during the operation, so that a certain gap is always maintained between the cylinder wall and the stirring shaft, so that the running resistance of the whole machine is greatly reduced. Completely eliminate the boring machine, block the phenomenon, reduce the shutdown cleaning time, improve the work efficiency, the water supply is controlled by the valve group, in order to stabilize the water supply and clean water quality of the system, the filter is set in the pipeline, and the main control The cabinet controls the interlocking parts of the humidifier to achieve the purpose of controlling the water supply and constant humidity operation. The dust humidifier is installed in the ash warehouse, the lower part of the ash bucket, and the dry ash is evenly input into the machine through the impeller feeder (electric air locker), and the dry ash is scattered in the directional running ratchet and the limited amount of water (the water volume can be adjusted) ) Forced mixing is carried out, and the material after reaching the predetermined humidity is pushed to the discharge port through the spiral conveyor belt to achieve the purpose of completely solving the secondary dusting, and the appropriate moderate requirement has been achieved by controlling the amount of water added. The product is suitable for humidification, agitation and transportation of solid particulate materials such as chemical, mining, power plants, steel mills, etc. The twin-shaft humidifier is equipped with a pair of high-strength stirring shafts, and a plurality of fan-shaped blades are arranged at a certain angle and pitch. Stirring the blades, the two rotating shafts rotate in the opposite direction to uniformly stir and screw the humidified dry ash. It is mainly used for spraying, humidifying and conveying the powder in the dry ash of various ash warehouses to meet the requirements of environmental protection. X Ray Lead Neck Collar,Xray Lead Thyroid Collar,X-Ray Lead Rubber Protection Collar,0.5Mmpb Leaded Neck Protection Collar Longkou Kangxie Medical Instrument Co., Ltd , https://www.lkkangxiemedical.com