Gun-Type Curing Light,Gun-Type Led Curing Light,Gun-Type Light Curing Unit,Gun-Type Bluephase Curing Light Rolence Enterprise Inc. , https://www.rolencedent.com
How to use and maintain the generator?
(1) The generator wiring must be correct. To this end, it should first be determined whether the terminal or lead wire is a hot wire or a ground wire. Under normal circumstances, the terminal or outlet of the generator is marked with a certain mark to distinguish the fire line or tower wire. The grounding terminal is often marked with the letters “Mâ€, “N†or “Oâ€, and the grounding sign is marked with “æâ€. When the ground wire column is not marked, it can be judged by the voltmeter or the “head-on†method during the operation of the generator. (2) The load of each circuit of the generator shall be used in accordance with the instructions for use of the generator, and the number of lamps may not be arbitrarily increased or decreased or replaced with a bulb of different power. (3) Belt-driven generators should adjust the tension of the transmission belt correctly. Normally, press the middle of the belt with your finger, and it is advisable to droop 10 to 20 mm. (4) After every working period of the generator, it shall be checked and adjusted according to the requirements of the instruction manual. Such as the SFF-45 type generators, the provisions of the use of about 500 hours for dismantling inspection and maintenance; JF-6l-type generators require normal operation for about 1000 hours for dismantling inspection and maintenance.