Shaanxi Hongbaiyi Biotech Co., Ltd. , https://www.sxhongbaiyi.com
How to do mushroom abnormalities
1. Empty roots, white water spray, lack of humidity, lack of water in the overburden, and insufficient water for fruiting bodies. In short, because the humidity of the mushroom house is small, it will cause the white stem of the stipe to change, and it will develop into a hollow later. Therefore, we must pay attention to the timely spraying of water in the production, and the relative humidity of mushroom houses should be kept above 85%. 2. Rust spot After the mushroom has sprayed water several times, it is required to open the doors and windows for 0.5 hours to 1 hour for ventilation to keep the indoor air fresh. Otherwise, the humidity in the mushroom room is too large, it will make the surface of the mushroom to stay small water droplets, a long time to form rust-colored spots. 3. Red roots before the mushrooming stage of high temperature water, soil moisture content of the overlying soil, culture materials, acid and excessive sugar, poor ventilation, etc. may form red root. Care should be taken to keep the moisture content of the cover soil between 22% and 25%, avoiding water spray at high temperatures. Top dressing should be appropriate and sugar should be appropriate. If red roots are found, lime water may be sprayed as appropriate. 4. Hard-opening and early-opening mushroom room temperature difference between day and night more than 10 °C, or in the event of cold air attack, will cause a hard open umbrella. If the mushroom density is too high, the temperature is too high, the humidity is too low, and the fruiting body grows quickly and the handle is thin, etc., the umbrella will be opened in advance. The prevention and control method is to cover the drapery outside the room during the temperature fusion to keep the indoor temperature and humidity stable. 5 malformation mushroom ventilation is poor, mushroom house carbon dioxide concentration more than 0.3% easy to get out of abnormal mushroom; mushrooming parts too deep, mushrooms grown in the soil between the joints are often deformed, according to the specific circumstances to take appropriate measures. If a continuous high temperature above 23°C is encountered during fruiting, it will incur a large number of dead mushrooms. Therefore, attention should be paid to the ventilation and cooling in high temperature period.