Boldenone Series ,Withe Crystalline Powder,Boldenone Undecylenate Testosterone Raw Powders Co., Ltd. , http://www.nsrawpowders.com
Components:
1. Piercing device--Made of medical grade white ABS, with or without air Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4 Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site- Made of hard transparent PVC+injection site made of natural or synthetic Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm, 150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1pcs/blister package,20pcs/MID. PE bag,20bags/CTN carton size changes according to the specific volume of products. (Volume is up to Chamber size, tube length, different components)
1pcs/polybag (HDPE, LDPE, compound film), 20pcs/MID. PE bag, 20bags/CTN, carton size changes according to the specific volume of Products.
Products: Infusion set/Blood Transfusion sets/I.V.series solutions.
Components:
1. Piercing device--Made of medical grade white ABS, with or without air Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4 Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site- Made of hard transparent PVC+injection site made of natural or synthetic Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm, 150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1pcs/blister package,20pcs/MID. PE bag,20bags/CTN carton size changes according to the specific volume of products. (Volume is up to Chamber size, tube length, different components)
1pcs/polybag (HDPE, LDPE, compound film), 20pcs/MID. PE bag, 20bags/CTN, carton size changes according to the specific volume of Products.
Disposable Infusion Set with Ce/ISO13485
Model NO.: MDS-ISA003
Logo Printing: With Logo Printing
Trademark: MEDISEA
Transport Package: 1PCS/Blister Package,20PCS/MID. PE Bag,20bags/CTN
Origin: Shanghai, China
HS Code: 90183900
Model NO.: MDS-ISA003
Logo Printing: With Logo Printing
Trademark: MEDISEA
Transport Package: 1PCS/Blister Package,20PCS/MID. PE Bag,20bags/CTN
Origin: Shanghai, China
HS Code: 90183900
Products: Infusion set/Blood Transfusion sets/I.V.series solutions.