The use and maintenance of horizontal centrifuges have many problems that need attention and attention. In order to better use the centrifuge and avoid accidents, let's take a look at some common problems of centrifuges: What maintenance should be paid attention to in a horizontal centrifuge to extend the life? What are the common accidents of horizontal centrifuges? What should I pay attention to when placing the horizontal centrifuge? The above is the maintenance and common faults of the horizontal centrifuge shared today. I hope that after you finish reading, you will have more skills/methods/hands for using the horizontal centrifuge later. 500G Salted Black Bean with Ginger Canned Canned Soy Bean,Canned Soya Bean,Canned Soy Black Bean,Canned Black Beans jiangmen city hongsing food co., ltd. , https://www.jmhongsing.com
After each use, the lid of the centrifuge should be opened to allow the heat or moisture to evaporate naturally. If you have used low temperature centrifugation before, there may be icing, then wait for the ice to melt, and wipe it with dry cotton gauze in time, etc. Cover the cover with obvious moisture. If the centrifuge rotor can be replaced, each rotor should be removed in time after use, cleaned with a clean, dry medical gauze, and placed under the buckle. Do not use a sharp scraper. The aluminum rotor should be cleaned frequently, and the centrifuge should not be maintained and repaired frequently. The operator should cut off the power when leaving. For the first time users, please consult the personnel who have used it before or refer to the instruction manual. Do not use it blindly.
Due to the high frequency of use of the centrifuge, the machine is damaged and the frequency of the accident is high. The main reason is caused by improper operation of the experimenter. Common problems are: the cover cannot be opened, the centrifuge tube cannot be taken out, and the centrifuge does not work after pressing the button. More serious problems include uneven bending of the shaft, motor burnout, horizontal buckets, more serious accidents and even injuries, and so on.
Centrifuges are generally placed in a dry place away from direct sunlight. Centrifuge heat dissipation is relatively large, do not pile up debris around, surrounded by walls, baffles and other items that are not airtight, poor heat dissipation, at least 10cm. At the same time, the centrifuge should be placed in a room as far as possible, and no organic reagents or flammable materials should be placed around.