Vegetable dehydrator, also known as centrifugal dehydrator, is a series of mechanical equipment that uses centrifugal force to dehydrate and dry. It has a wide range of applications and stable performance, and is very popular among users. And if you want to make it perform as it should, then it is necessary to understand the operating procedures of the vegetable dehydrator .

Vegetable dehydrator use steps:

1. Please check the machine before use. Make sure the machine is not abnormal. We can use the hand to turn the inner tube to see if it can rotate, or if there is a strange sound when it is rotated. It is also necessary to check whether the brakes are flexible and timely with the brakes. If there are problems, please repair and dispose of them in time. Do not let the machine run with faults.

2. According to the rated capacity of the dehydrator, load a certain amount of items to be dried (the respective zui heavy loads of 500, 600, 800, 1000, 1200 type are 25, 40, 80, 130, 220 kg). After loading the material, make sure that the loading is reasonable and not biased.

3, using the open control, we only need to open the empty switch, the machine can be powered. If the electric cabinet or frequency converter is used for control, we need to carry out the corresponding speed design as needed, and then set the corresponding working time through the time relay, then go to the power supply production.

4. After the machine is finished (generally 5-8 minutes, no significant water outflow from the drain pipe), we can turn off the power. Then use the handbrake to brake (do not brake in the end, but should use the brake method to stop the brakes)

5. After the machine stops rotating completely, we can take out the materials that have been dried and then proceed to the next cycle.

Vegetable dehydrator notes:

1. When the machine is in production, it should be observed whether there is abnormal sound, abnormal movement or odor. Please cut off the power supply immediately for machine maintenance, and then re-produce after the trouble is eliminated.

2, should properly control the load of the machine, so as not to overload, a lot of load. Overloading can cause increased motor load and reduced machine life. Less load will result in wasted energy.

3. When the machine does not stop rotating completely, we must not put your hand into the material to avoid the problem of entanglement and grievance.

4. Regularly check the normality of the brakes and start the coupling device. Adjust or replace it in time.

Shandong Kemaida Company believes that as long as you use the machine according to the above vegetable operation rules, it will be able to give it the performance and the failure rate is lower and the service life is shorter. If you have any questions about this, please contact us directly, we will be happy to provide you with services!