The components of the industrial dust collector are protected against foreign centrifugal fans. The impeller generates large air volume, high wind pressure and hard fan characteristic curve. And the noise reduction measures are taken, and the aerodynamic noise of the fan is significantly reduced. The filter parts are made of 208 industrial polyester twill as filter material. Each bag is equipped with spring steel wire mesh. The filtering effect is good, the cleaning is thorough, the filter bag is convenient to replace, and the service life is long. The cleaning mechanism uses a motor to drive the eccentric wheel, the connecting rod and the spring steel plate into a ash ash device for removing dust adhering to the filter bag. The cleaning control device adopts two types: manual control and self-control. Manual control means that after the fan is turned off and the dust collector stops working, the cleaning mechanism automatically vibrates and clears the dust for 10 seconds.

The industrial dust dust collector adopts a self-controlling cleaning mechanism for regular vibrating cleaning or manual vibrating mechanism to automatically vibrate for dozens of seconds, so that the dust adhering to the outer surface of the bag shakes off and falls into the dust collecting container ( The dust in the drawer is removed by manual extraction. Equipment range: This series of products are widely used in the foundry industry, ceramic industry, glass industry and refractory materials, cement building materials, grinding wheel manufacturing, chemical products, mechanical processing and other industries. Metal cutting for large proportion, foundry sand, such as lathes, grinders, milling machines, grinders, polishing machines, etc., and medium-specific dust, such as cement, ceramic powder, gypsum powder, asbestos powder, carbon powder, pigments, Bakelite powder, plastic powder, etc.

The industrial dust collector is a device for collecting and collecting waste media particles, dust smoke, oil and water generated during production, operation and transportation. Industrial vacuum cleaners use AC power and have high power. They are generally classified into movable and fixed types. The multiphase mixture involved in industrial dust removal is referred to as a gas phase suspension or aerosol. The fine particles dispersed in it are called dust particles or particles, and the state of accumulation of dust particles is called powder. In the engineering design, in order to properly design and select the dust removal equipment, the main physical and chemical properties of the dust must be mastered. The parameters used to describe the dust properties are: particle size and dispersion, density and bulk density, cohesiveness, wettability, and charge. Electrical and electrical conductivity, natural accumulation angle, explosive.