Our super green powder are mainly used as food supplement, health and wellness product additive, you can mix the super greens and Vegetable Powder according to your own formula. Spirulina, chlorella, broccoli powder, kale powder, buckwheat powder, wheatgrass powder, barley grass powder. Those powders are rich in protein, fibers, antioxidant and chlorophyll which can clear free radicals, enhance immunity and providing trace elements people can`t obtain from high carbohydrate diet. Organic super greens powders are Non-GMO, gluten free and vegan friendly, welcome to reach us for more you would like to know.
Super Greens,Buckwheat Grass,Organic Super Greens,Super Greens Powder YT(Xi'an) Biochem Co., Ltd. , https://www.ytwholefood.com
High-speed chopping machine operating procedures and precautions for use
The precautions for the operation of the high-speed chopping machine are provided by Zhucheng Kangding Co., Ltd., which mainly introduces the operation rules of the high-speed chopper and the safety precautions during use. Users should read carefully before use to avoid personal injury and affect the equipment. The normal operation.
High-speed chopper mixing machine operation procedures:
1. Check and adjust the tightening bolts of the knife set before each shift to ensure that the file is fastened and the distance between the tip and the pot is between 1-1.5mm. The cable nut at the front end of the spindle should be tightened once per shift to prevent the file from loosening.
2. When the high-speed chopper is turned on, it is strictly forbidden to put your hand under the knife cover of the crucible to avoid personal injury.
3. Do not place any objects on the cover of the machine to prevent vibration when the mixer is running. Slide it into the crucible, causing a break in the cutter and causing a major accident.
4. Check whether the blade is sluggish before starting the high-speed chopper, whether there is any foreign matter in the turntable and the sanitary condition.
5. Carefully check the materials that are poured into the crucible. It is absolutely not allowed to have hard objects such as bones, stones, and iron to prevent damage to the tools and major accidents.
6. After feeding (according to the process requirement, the total weight of the 200 chopping machine should not exceed 100-140kg), after opening the turntable, the speed of the mixing knife is opened (from low speed to high speed).
7. Please pay attention to the temperature of the material when mixing, and add ice when necessary.
8. It is strictly forbidden to start the crucible and the cutter shaft frequently to prevent the mechanical life from being degraded.
9. The hydraulic system should pay attention to manual stop to prevent damage to the hydraulic system.
10. The high-speed chopper should be cleaned at the end of each day. The knife cover should be opened to the appropriate position, and the main unit power is turned off and then cleaned. Strictly splashed on the power distribution cabinet to prevent electric shock and damage to the device.
11. The oil lubrication and lubrication should be applied to the lubrication parts of the whole machine in strict accordance with the requirements of the user manual of the high-speed chopping machine.
12. When the tool shaft is low speed and the tool shaft is in high speed conversion, it must be converted to each other through the "zero" speed (tool axis stop). Pay attention to safety when changing speed. Do not put your hand under the knife cover of the crucible.
13. When the glass cover is opened to the all open position, the discharge lowering button can be connected, and the lifting button can be used to complete the discharging and returning work.
14. When the glass cover is not opened or not fully opened, press the discharge lowering button to avoid damage to the glass cover.
15. When the high-speed chopper is running, the operator is not allowed to leave the site.
16. In case of emergency, press the emergency stop switch to stop.
High-speed chopping machine use precautions:
1. The temperature of the raw materials to be processed shall not be lower than -5 °C.
2. The weight of raw materials to be processed shall not be heavier than 1Kg.
3. The block shape of the raw materials to be processed shall not exceed 1000 cubic centimeters {10cm*10cm*10cm}.
4. It is strictly forbidden to cut ice cubes in the raw materials to be processed.
5. The materials to be processed should be lower than the rated capacity of the equipment and must not be overloaded.
6. The six-speed speed provided by the cutter shaft should be reasonably selected according to the actual food processing technology requirements.
7. The turntable provides three speeds, which should be reasonably selected according to the actual food processing technology requirements.
8. Special attention should be paid to the fact that the speed of the cutter shaft and the rotation speed of the turntable should be scientific and reasonable, so as to prevent the material in the feed port from being over-congested and overflowing.
The high-speed chopping machine operating procedures are introduced here. Pengqi Machinery Co., Ltd. specializes in producing all kinds of vacuum tumblers, brine injection machines, chopping machines, complete models and reasonable prices. Welcome new customers to negotiate business. .