The fruit tree whitening agent is a preparation prepared by mixing lime, vegetable oil, salt, etc., as a main component, and is mixed with a mixture of white and black paints. The whitening agent is applied differently depending on the function it plays and the purpose of whitening. Divided into many kinds, in the production of fruit trees according to the actual needs of configuration of different types of whitening agent can achieve a targeted, to achieve a multiplier effect. Whitening agent 1, kill bacteria. The quicklime and salt ingredients in the whitening agent all have the function of sterilization and sterilization, which can eliminate the various pathogenic bacteria in the base of the trunk over winter, and accelerate the wound healing after whitening. 2. Kill eggs. Many eggs like wintering in the gap between the bark and inside the trunk, and whitening can effectively eliminate these eggs. 3, control pests. Pests that harm fruit trees generally prefer dark and dirty places. They don't like white, clean places. After the trunk is coated with whitening agent, the pests cannot dare to climb along the trunk to damage the trees. 4, to prevent livestock bite. After the trunk is painted white, it can also prevent the animal from biting the bark. 5, to prevent freezing damage. After entering the winter, the spring and the following spring, the temperature difference between day and night is great. By applying white, you can reflect enough sunlight and ultraviolet rays during the day to reduce the temperature difference between day and night at the base of the trunk and avoid frost damage. White-painted trees, because of the slow accumulation of temperature at the base of the trunk, often delay the sprouting and flowering of the trees, and can avoid frost damage caused by “cold winterâ€. 6, to prevent sunburn. After the trunk is painted white, it can reflect sunlight and ultraviolet rays during the day, which can effectively reduce the occurrence of sunburn damage. Whitening time From the end of November to mid-February, white trunks can be painted. During this period, the temperature in winter is low, and the cold air sinks. The trunk is most vulnerable to freezing injury. Some of the pests are buried in the cracks of the trunk skin during the winter. The effect of whitening the trunk is better, which can significantly reduce the incidence of diseases and insect pests in the coming year and reduce the amount of pest control work in the coming year. White parts The height of the painted white is 1-1.5 meters from the ground, with emphasis on the white roots of the trunk. The large trees, diseased trees, and the south of the trunk should be heavily coated with white. Ordinary branches, branches of the year do not white, so as not to burn the cortex. Type of whitening agent 1. The anti-freeze-inducing whitening agents such as orange, sweet orange and pomelo are not tolerant to cold fruit trees, the peach trees in the north of the Huaihe River, and the fruit trees in low-lying orchards are vulnerable to freezing damage. Brushing with whitening agents is to put them on winter clothes, forming a thermal insulation layer, which increases the cold resistance and frost resistance of these fruit trees. Talc powder whitening agent: 0.5 kg of talcum powder, 0.5 kg of corn flour or bean flour, 10 kg of water, and evenly stirred, while 0.2 kg of detergent powder can be added to increase the adhesion of the whitening agent. Lime cement yellow mud whitening agent: 5 kilograms of water plus 2 kilograms of quick lime, after mixing well, pour 2 kilograms of cement and 1 kilogram of yellow mud in turn, and mix thoroughly to form a slurry. This type of whitening agent is resistant to rainwater erosion. It can be kept on the bark for a year without falling off, and it can also prevent the occurrence of infestation diseases. 2. For the purpose of preventing insect pests, the bark must first be scraped bark 50 centimeters above the root of the trunk before applying the whitening agent, and the effect of scraping the skin of the fruit trees with more than 10 years of fracturing and splitting will be better, and the trunk will be scraped off. The old skin on the main branch, severely scraping pears, apple trees, scraping chestnut trees, etc., peach, plum, apricot tree is not recommended to scrape, to prevent the occurrence of plastic injection. If a pest is found on a tree trunk or there are pests in the stem, the observed pests are killed first and then whitened. Lithosulfide mixture liquid: firstly melted thoroughly with 10 kg of water and 5 kg of quicklime, and stir well, then add 1 kg of yellow mud in order, stir well, then add 11 kg of bumeide lime sulfur, then add 0.5 kg each Salt and vegetable oils, stir well. Lime and lime sulfur can kill pests and eggs that overwinter in the cracks in the bark. Salt can prevent the whitening agent from falling off and sticking. Lime and sulfur mixture whitening agent: 5 kg of quicklime and 0.3 kg of salt are first opened with 8 kg of hot water, stirred into a paste, and then 0.3 kg of vegetable oil, 0.5 kg of sulfur powder, 0.2 kg of bean flour or corn flour are added. Stir until uniform with the addition. Lime and sulfur powder can prevent frost and insect pests. Salt can infiltrate lime and sulfur powders into the trunk of the trunk to maintain moisture and prevent dry peeling. Vegetable oils and bean flour enhance the adhesion of the whitening agent on the trunk. 3. Anti-disease whitening agent Lime Calcium Sulphate Mixture: Dissolve 0.5 kilograms of copper sulphate in a container with 1 kilogram of hot water. Dissolve 5 kilograms of quicklime and 5 kilograms of clear water into lime milk in another container. In the end, pour the dissolved copper sulfate solution into a container with lime milk and stir well. Limestone sulfur residue residue whitening agent: 5 kg of lime and 0.5 kg of lime sulfur residue plus 25 kg of water, plus 0.1 kg of salt, stir well. White note 1, whitening agent should be used with the distribution, should not be equipped with more, according to the whitening task to configure the amount of whitening agent, with the whitening agent can not be put for a long time. 2, in the process of configuring the whitening agent, each time the ingredients are added should be fully stirred, so that it can make the whitening agent evenly stuck to the trunk. 3, in the orchard before whitening, should be the first winter pruning orchards, and then cut the branches together to burn, the trunk on the fracture, frozen cracks and other wounded parts wrapped with plastic film. 4. Observe whether pests have entered the tree trunk. If the harmful insects break into the application of cotton or cotton cloth to dip the insects and kill the pests, then apply white.
Anti slip tape
Jerry tape is specialized in anti slip tape for 10 years. Our anti slip tape is designed with a highly durable weatherproof triple layer adhesive which is imported from Japan to make sure your tape does not peel off easily. It offers extra traction,help reduce the risk of slipping and falling when you go up and down the stair,Great for the family with kids pets and elders,Durable waterproof anti skid tape for steps is perfect for outdoor and indoor use.
1. Material of Jerry tape anti slip tape
2. Features of Jerry tape anti slip tape
1).Grit sandpaper surface with adhesive back.
3. Applications of jerry tape anti slip tape
1).Floor,stair,slope Anti Slip Tape,Anti Skid Tape,Non Slip Tape,Non Skid Tape Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.yuhuanptapes.com
2).Grease and water resistant.
3).Temperature range -40° to 158°F.
4).Extra-wide rolls up to 3 ft. ideal for ramps and walkways.
5).Heavy Duty - Thicker extra-coarse surface with aggressive adhesive. For muddy, greasy and oily areas.
2).Machines and motor vehicles
3).kitchens and canteens
4).Prevention of slipping accidents
5).Fixes smooth, wet, oily and greasy floors
6).Non-slip demarcation