The Sprite beverage filling machine is filled by liquid weight under atmospheric pressure. This type of filling machine is divided into two types: timed filling and constant filling. It is only suitable for filling low viscosity gas-free liquids such as milk, wine, purified water, juice drinks and so on.

Sprite beverage filling machines are filled at temperatures above atmospheric pressure and can be divided into two types:

One is that the pressure in the liquid storage tank is equal to the pressure in the bottle, and is filled by the liquid self-weight flowing into the bottle, which is called isostatic filling; the other is that the pressure in the liquid storage tank is higher than the pressure in the bottle. The liquid flows into the bottle by the pressure difference, and this method is often used in high-speed production lines. The pressure filling machine is suitable for liquid filling with gas, such as beer, soda, champagne, carbonated drinks, soda water, etc.

The Sprite beverage filling machine is filled at a pressure below the atmospheric pressure in the bottle;

The Sprite beverage filling machine has a simple structure, high efficiency, and wide adaptability to the viscosity of materials, such as oil, syrup, and fruit wine.

Sprite beverage filling machine filling amount is not allowed to be processed

1. The speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed;

2. Is there any foreign matter in the quick-installing three-way control valve? If so, please arrange it. There is air in the leather tube of the three-way control valve and the filling head. If there is air, try to cut or sweep the air.

3. Check if all seals are damaged. If there is damage, please replace them with new ones;

4. Whether the filling valve plug has a stuck appearance or delayed opening. If there is a jam, the valve core should be installed from the head. If the delay is opened, the thin cylinder throttle valve needs to be conditioned;

5. The elastic force of the spiral spring is tightened up and down in the three-way control valve, and the elastic check valve will not open;

6. Is the filling speed too fast, adjust the filling speed throttle valve, and lower the filling speed;

7, all the clamps, leather tube buckle can be sealed, if any, please correct;

8. The magnetic switch is not loose. Please lock it after each adjustment.