Perhaps because of the high speed of the high-speed centrifuge, its motor will be very prone to heat. If you feel that the motor of the high-speed centrifuge is hot, then we must pay attention to the operation of the centrifuge, which may be related to the heat of the motor bearing, but what is the cause of the motor bearing heat? This requires careful analysis of the reasons. Below, we will come together to listen to the reasons summarized by Hunan Gilson Technology Development Co., Ltd. The first reason may be centrifugal overload or overload, or there may be problems with the cooling fan, etc., or it may be the heat generated by mechanical friction, but the main reason is whether the bearing of the centrifuge is genuine, if the user is at a low price And the choice of low-cost bearings, such bearings are very easy to heat, and even the bearing burned. Therefore, users must choose authentic genuine bearings, do not choose cheap products and choose cheap products. Even if it is the same brand, its origin is different and the quality may be different. The second reason is to pay attention to the lubrication of the machine, the selection of high-quality high-temperature lithium grease, the difference of lithium grease is another major cause of bearing heat. At the same time, we have to observe carefully, if the mechanical friction is accompanied by noise, and the mechanical parts will have obvious wear, which indicates that there is a problem with the bearing, then the bearing needs to be replaced. Therefore, it is recommended that people buy large-capacity bearings, centrifuges to serve high-speed equipment, high-speed is to use good bearings, high-quality bearings to ensure long-term normal operation of the centrifuge. The third reason is whether the centrifuge spindle concentricity is accurate. Under normal circumstances, people will not pay attention to the concentricity. If the spindle concentricity tends to be large, it will easily cause the bearing to heat up. At this time, the centrifuge motor production is required to have strong technology and production capacity. In the real society, some centrifuge manufacturers buy their own materials to assemble themselves in order to save costs, which will cause the spindle concentricity to deviate, which will cause the bearing to heat up. . The above points are the main reason for the heat of the centrifuge motor. There may be some reasons, such as the user not paying attention to the balance during use, which will also cause the motor to heat up. Therefore, in addition to choosing a high-quality centrifuge, people should also pay attention to the usual habits. This article was edited by the laboratory instrument - Hunan Gilson Technology Development Co., Ltd. Our natural sweetener is extracting from natural plant. Like inulin powder, there are jerusalem artichoke and chicory sources. Monk fruit extract has sweetness of hundreds times than that of sugar. As natural food ingredient supplier, we also supply bulk sweetener like fructo-oligosaccharide, xylooligosaccharide, xylitol, sorbitol, Stachyose, D-Allose, erythritol, stevia extract powder which has very similar taste with sugar, we also accept blend customization of sweetener, please feel free to reach us for more if any interests! Natural Sweentener,Inulin Powder,Bulk Sweetener,Monk Fruit Extract YT(Xi'an) Biochem Co., Ltd. , https://www.ytlinkherb.com